2. CPU fan pi n sel ecti on (3-pi n FM_CPU1, FM_CPU2)

These jumpers allow you to connect either a 3-pin or a 4-pin fan cable plug to the CPU fan connectors (CPU_FAN1, CPU_FAN2). Set these jumpers to pins 1-2 if you are using a 3-pin fan cable plug, or to pins 2-3 if you are using a 4-pin plug.

P5MT-S

P5MT-S FM CPU Setting

FM_CPU1

1

2

2

3

3-pin fan

4-pin fan

 

 

(Default)

FM_CPU2

1

2

2

 

3

3-pin fan

4-pin fan

 

(Default)

3. USB devi ce wake-up (3-pi n USBPW12, USBPW34)

Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S4 sleep mode (no power to CPU, DRAM in slow refresh, power supply in reduced power mode).

USBPW12

1

2

2

3

P5MT-S

+5V +5VSB (Default)

USBPW34

3

2

 

2

1

 

 

 

 

 

+5VSB +5V (Default)

P5MT-S USB Device Wake-Up

•The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up.

•If you are using Windows 2000, you need to install Service Pack 4 to wake up the system from S4 sleep mode.

•The total current consumed must NOT exceed the power supply

capability (+5VSB) whether under normal condition or in sleep mode.

ASUS P5MT-S

2-19