3.4Creating a RAID driver disk

A floppy disk with the RAID driver is required when installing Windows® XP operating system on a hard disk drive that is included in a RAID set. For Windows® VistaTM operating system, use either the motherboard support DVD or a USB device with the RAID driver.

3.4.1Creating a RAID driver disk without entering the OS

To create a RAID driver disk without entering the OS:

1.Boot your computer.

2.Press <Del> during POST to enter the BIOS setup utility.

3.Set the optical drive as the primary boot device.

4.Insert the support DVD into the optical drive.

5.Save changes and exit BIOS.

6.Press any key when the system prompts “Press any key to boot from the optical drive.”

7.When the menu appears, press <1> to create a RAID driver disk.

8.Insert a formatted floppy disk into the floppy drive then press <Enter>.

9.Follow succeeding screen instructions to complete the process.

3.4.2Creating a RAID driver disk in Windows®

To create a RAID driver disk in Windows®:

1.Start Windows®.

2.Place the motherboard support DVD into the optical drive.

3.Go to the Make Disk menu, then click NVIDIA 32/64bit XP SATA RAID Driver to create a NVIDIA® 32/64 bit XP SATA RAID driver disk.

4.Insert a floppy disk/USB device into the floppy disk drive/USB port.

5.Follow the succeeding screen instructions to complete the process.

Write-protect the floppy disk to avoid computer virus infection.

ASUS P5N7A-VM

3-19