2.Press the load lever with your thumb (A) and move it to the left (B) until it is released from the retention tab.
Retention tab | PnP Cap |
Load lever | A |
|
B
This side of the cam box should face you.
To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU.
3.Lift the load lever in the direction of the arrow to a 135º angle.
4.Lift the load plate with your thumb and forefinger to a 100º angle (A), then push the PnP cap from the load plate window to remove (B).
B
A
Load plate
Chapter 1: Product Introduction |