Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components.
To install a DIMM: |
| 2 | |
1. | Unlock a DIMM socket by | 3 | DDR2 DIMM notch |
| |||
| pressing the retaining clips |
|
|
| outward. |
|
|
2. | Align a DIMM on the socket |
|
|
| such that the notch on the | 1 |
|
| DIMM matches the break on |
| |
| the socket. |
|
|
3.Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated.
Unlocked retaining clip
•A DDR2 DIMM is keyed with a notch so that it fits in only one direction. Do not force a DIMM into a socket to avoid damaging the DIMM.
•The DDR2 DIMM sockets do not support DDR DIMMs. DO not install DDR DIMMs to the DDR2 DIMM sockets.
Follow these steps to remove a DIMM.
1.Simultaneously press the retaining clips outward to unlock the DIMM.
Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM
might get damaged when it 1 flips out with extra force.
2.Remove the DIMM from the socket.
2
1
DDR2 DIMM notch
ASUS |