Asus P5SD2-X SE manual Quick Boot Enabled, Full Screen Logo Enabled, Bootup Num-Lock On

2.6.2	Boot Settings Configuration
Boot Settings Configuration			Allows BIOS to skip
Quick Boot		[Enabled]	certain tests while
			booting. This will
Full Screen Logo		[Enabled]	decrease the time
Bootup Num-Lock		[On]	needed to boot the
Wait For ‘F1’ If Error		[Enabled]	system.
Hit ‘DEL’ Message Display		[Enabled]
Interrupt 19 Capture		[Disabled]

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items.

Configuration options: [Disabled] [Enabled]

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled]

Set this item to [Enabled] to use the ASUS MyLogo™ feature.

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On]

Wait for ʻF1ʼ If Error [Enabled]

When set to Enabled, the system waits for the F1 key to be pressed when error occurs. Configuration options: [Disabled] [Enabled]

Hit ʻDELʼ Message Display [Enabled]

When set to Enabled, the system displays the message “Press DEL to run Setup” during POST. Configuration options: [Disabled] [Enabled]

Interrupt 19 Capture [Disabled]

When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled]

2-32 Chapter 2: BIOS setup