Asus P5SD2-X SE manual Chassis intrusion connector 4-1 pin Chassis

8.Internal audio connectors (4-pin CD, AUX)

These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV-tuner, or MPEG card.

P5SD2-X SE

Right Audio Channel Ground Ground Left Audio Channel Right Audio Channel Ground Ground Left Audio Channel

CD(Black) AUX(White)

P5SD2-X SE Internal Audio Connectors

9.Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component

is removed or replaced. The signal is then generated as a chassis intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature.

SE	CHASSIS
P5SD2-X	MB	Signal
	+5VSB_	Chassis GND
P5SD2-X SE Intrusion Connector (Default)

1-30 Chapter 1: Product introduction