10.System panel connector (10-1 pin F_PANEL)

This connector supports several system chassis-mounted functions.

 

 

F_PANEL

P5V-VM

PWRSW

 

 

ULTRA

 

 

 

 

 

GND

Reset

 

 

PWR

Ground

 

PLED

PLED-

IDELED-

 

PLED+

IDELED+

 

 

 

1

P5V-VM ULTRA System Panel Connector

IDELED RESET

•System power LED (2-pin PLED)

This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

•Power/Soft-off button (2-pin PWRSW)

This connector is for the system power button. Pressing the power button turns the system ON or puts the system in SLEEP or SOFT-OFF mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF.

•Hard disk drive activity (2-pin IDELED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD.

•Reset button (2-pin RESET)

This connector is for the chassis-mounted reset button for system reboot without turning off the system power.

1-30

Chapter 1: Product Introduction