Hit ‘DEL’ Message Display [Enabled]

When set to [Enabled], the system displays the message “Press DEL to run Setup” during POST. Configuration options: [Enabled] [Disabled]

Interrupt 19 Capture [Disabled]

When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled]

2.6.3 Security

The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the configuration options.

Security Settings

 

<Enter> to change

 

password.

 

 

Supervisor Password :Not Installed

<Enter> again to

User Password

:Not Installed

disable password.

Change Supervisor Password

Change User Password

←→ Select Screen

↑↓ Select Item

Enter Change

F1 General Help

F10 Save and Exit

ESC Exit

v02.54 (C)Copyright 1985-2003, American Megatrends, Inc.

Change Supervisor Password

Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you have set a password, this item shows Installed.

To set a Supervisor Password:

1.Select the Change Supervisor Password item and press <Enter>.

2.On the password box that appears, type a password composed of at least six letters and/or numbers, then press <Enter>.

3.Confirm the password when prompted.

The message “Password Installed” appears after you successfully set your password. The Supervisor Password item now shows “Installed”. To change the supervisor password, follow the same steps as in setting a user password.

To clear the supervisor password, select the Change Supervisor Password then press Enter. The message “Password Uninstalled” appears.

To clear the supervisor password, select the Change Supervisor Password then press Enter. The message “Password Uninstalled” appears.

2-28

Chapter 2: BIOS Information