Resume On PS/2 Mouse [Disabled]

When set to [Enabled], this parameter allows you to use the PS/2 mouse to resume the system. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]

Resume On RTC Alarm [Disabled]

When set to [Enabled], this option allows you to use the RTC alarm to turn on the system. Configuration options: [Enabled] [Disabled]

2.5.4 Hardware Monitor

CPU Temperature

[77.5°C/171.5°F]

CPU Temperature

 

CPU Fan Speed

[4500RPM]

 

Chassis Fan Speed

[N/A]

 

VCORE Voltage

[1.376V]

 

3.3V Voltage

[3.264V]

 

5V Voltage

[5.232V]

 

12V Voltage

[12.144V]

 

←→

Select Screen

↑↓

Select Item

+-

Change Option

F1

General Help

F10

Save and Exit

ESC

Exit

v02.54 (C)Copyright 1985-2003, American Megatrends, Inc.

CPU Temperature [xxx°C/xxx°F]

The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures.

CPU Fan Speed [xxxxRPM]

The onboard hardware monitor automatically detects and displays the CPU fan speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the specific field shows N/A. Configuration options: [xxxxRPM] [N/A] [Ignored]

Chassis Fan Speed [xxxxRPM] or [N/A]

The onboard hardware monitor automatically detects and displays the chassis fan speed in rotations per minute (RPM). If the fan is not connected to the chassis, the specific field shows N/A.

Configuration options: [Ignored] [xxxRPM] or [N/A]

VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage

The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators.

2-24

Chapter 2: BIOS Information