Asus P5WDG2-WS 9 . GAME/MIDI port connector (16-1pin GAME), 10 . Chassis intrusion connector (4-1pin CHASSIS)

9 . GAME/MIDI port connector (16-1 pin GAME)

This connector is for a GAME/MIDI port. Connect the USB/GAME module cable to this connector, then install the module to a slot opening at the back of the system chassis. The GAME/MIDI port connects a joystick or game pad for playing games, and MIDI devices for playing or editing audio files.

P5WDG2-WS

P5WDG2-WS Game connector

+5V J1B1 J1CX GND GND J1CY J1B2 +5V

GAME

_MIDI	+5V J2B1 J2CX _MIDI J2CY J2B2
IN	OU
	T

10 . Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event.

By default, the pins labeled ÒChassis SignalÓ and ÒGroundÓ are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature.

P5WDG2-WS

+5VSB MB Chassis Signal GND

CHASSIS

(Default)

P5WDG2-WS Chassis intrusion connector

ASUS P5WDG2-WS 2 - 39