Asus P5WDG2-WS 12 . Serial port connector (10-1pin COM1), 13 . ATX power connectors (24-pinEATXPWR, 2x4-pinEATX12V, 4-pinEZ_PLUG)

12 . Serial port connector (10-1 pin COM1)

This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.

P5WDG2-WS

COM1

PIN 1

P5WDG2-WS COM port connector

13 . ATX power connectors (24-pin EATXPWR, 2x4-pin EATX12V, 4-pin EZ_PLUG)

These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

WS-P5WDG2		DC
	EATX12V	+12V
		GND

EZ_PLUG

P5WDG2-WS ATX power connectors

+12V DC

GND

+12V DC		+12V DC			EATXPWR
				+3 Volts		Ground
				+12	Volts	+5 Volts
				+12	Volts	+5 Volts
			+5V Standby			+5 Volts
				Power OK		-5 Volts
GND		GND
				Ground		Ground
	+5V			+5	Volts	Ground
				Ground		Ground
	EZ_DET			+5 Volts		PSON#
	GND			Ground		Ground
	+12V
				+3	Volts	-12 Volts
				+3	Volts	+3 Volts

When installing two VGA cards using a 20-pin ATX PSU with sufficient +12V capability, we recommend that you connect the EZ Plug for better current path from +12V. Refer to the PSU documentation for dual VGA power requirements.

ASUS P5WDG2-WS 2 - 41