C State package limit setting [Auto]

This item appears only when you set the Intel(R) C-STATE Tech item to [Enabled]. We recommend that you set this item to [Auto] for BIOS to automatically detect the C-State mode supported by your CPU. Configuration options: [Auto] [C1] [C3] [C6]

2.5.2Uncore Configuration

The Uncore Configuration menu allows you to change the advanced chipset settings.

Memory Remap Feature [Enabled]

[Disabled]

Do not allow remapping of memory.

[Enabled]

Allows for the segment of system memory that was previously overwritten

 

by PCI devices to be remapped above the total physical memory.

2.5.3Onboard Device Configuration

HDA Controller [Enabled]

[Enabled]

Enables the High Definition Audio Controller.

[Disabled]

Disables the controller.

Front Panel Type [HD Audio]

[AC97] Set the front panel audio connector (AAFP) mode to legacy AC’97

[HD Audio] Set the front panel audio connector (AAFP) mode to high-definition audio.

Realtek LAN1 [Enabled]

[Enabled]

Enables Realtek LAN Controller.

[Disabled]

Disables Realtek LAN Controller.

LAN Boot ROM [Disabled]

This item appears only when you enable the previous item(s).

[Disabled]

Disables Realtek LAN Boot ROM.

[Enabled]

Enables Realtek LAN Boot ROM.

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Onboard USB 3.0 Controller [Enabled]

[Enabled]

Enables the USB 3.0 controller.

[Disabled]

Disables the controller.

2.5.4USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then press <Enter> to display the configuration options.

The USB Devices Enabled item shows the auto-detected values. If no USB device is detected, the item shows None.

ASUS P7H55/USB3

2-17