Full Screen Logo [Enabled]
[Disabled] | Disables the full screen logo display feature. |
[Enabled] | Enables the full screen logo display feature. |
| Set this item to [Enabled] to use the ASUS MyLogo 2™ feature. |
AddOn ROM Display Mode [Force BIOS]
[Force BIOS] | The |
| sequence. |
[Keep Current] | The |
| manufacturer had set the |
Bootup Num-Lock [On]
[Off] | Sets the |
[On] | Sets the |
Wait For ‘F1’ If Error [Enabled]
[Disabled] | Disables this function. |
[Enabled] | The system waits for the <F1> key to be pressed when error occurs. |
Hit ‘DEL’ Message Display [Enabled]
[Disabled] | Disables this function. |
[Enabled] | The system displays the message “Press DEL to run Setup” during POST. |
2.7.3Security
The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the configuration options.
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a Supervisor Password:
1.Select the Change Supervisor Password item and press <Enter>.
2.From the password box, type a password composed of at least six letters and/or numbers, then press <Enter>.
3.Confirm the password when prompted.
The message Password Installed appears after you successfully set your password. To change the supervisor password, follow the same steps as in setting a user password.
To clear the supervisor password, select the Change Supervisor Password then press <Enter>. The message Password Uninstalled appears.
If you forget your BIOS password, you can clear it by erasing the CMOS Real Time Clock (RTC) RAM. See section 1.6 Jumper for information on how to erase the RTC RAM.
ASUS P7H55/USB3 |