Chassis Fan Profile [Standard]

This item appears only when you enable the Chassis Q-Fan Control feature and allows you to set the appropriate performance level of the chassis fan.

[Standard]

Sets to [Standard] to make the chassis fan automatically adjust depending

 

on the chassis temperature.

[Silent]

Sets to [Silent] to minimize the fan speed for quiet chassis fan operation.

[Turbo]

Sets to [Turbo] to achieve maximum chassis fan speed.

CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage

The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Select Ignored if you do not want to detect this item.

2.7Boot menu

The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the submenu.

 

 

BIOS SETUP

UTILITY

 

 

Main

Ai Tweaker

Advanced

Power

 

Boot

Tools

Exit

 

 

 

 

 

 

 

 

Boot Settings

Boot Device Priority

Boot Settings Configuration

Security

Specifies the Boot Device Priority sequence.

A virtual floppy disk drive (Floppy Drive B: ) may appear when you set the CD-ROM drive as the first boot device.

←→ Select Screen

↑↓ Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit ESC Exit

v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.

2.7.1Boot Device Priority

1st ~ xxth Boot Device [Removable Dev.]

These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system.

Configuration options: [Removable Dev.] [Hard Drive] [ATAPI CD-ROM] [Disabled]

2.7.2Boot Settings Configuration

Quick Boot [Enabled]

[Disabled]

When set to [Disabled], BIOS performs all the POST items.

[Enabled]

When set to [Enabled], BIOS skips some power on self tests (POST) while

 

booting to decrease the time needed to boot the system.

2-22

Chapter 2: BIOS information