4.CPU and chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.

CPU_FAN

 

CPU FAN PWM CPU FAN IN CPU FAN PWR GND

 

CHA_FAN

8 054@+;5

GND

 

+12V

 

Rotation

8 054@+;5+8=KWVVMK\W

Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors!

The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan power.

5.USB connectors (10-1 pin USB78, USB910)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to

480 Mbps connection speed.

USB910

USB78

USB+5V USB_P10- USB_P10+ GND NC

USB+5V USB_P8- USB_P8+ GND NC

8 054@+;5

PIN 1

PIN 1

 

 

USB+5V USB P9- USB P9+ GND

USB+5V

8 054@+;5=;*KWVVMK\WZ[

USB_P7- USB_P7+ GND

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

The USB module cable is purchased separately.

Chapter 1: Product introduction

1-19