6.Intel® H61 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~4)

These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via Serial ATA 3.0 Gb/s signal cables.

SATA3G_1 SATA3G_3

GND RSATA_TXP1 RSATA_TXN1

GND RSATA_RXP1 RSATA_RXN1

GND

GND RSATA_RXN3 RSATA_RXP3 GND RSATA_TXN3 RSATA_TXP3 GND

SATA3G_2 SATA3G_4

8 054@+;5

GND

 

RSATA_TXP2

 

RSATA_TXN2

 

GND

 

RSATA_RXP2

 

RSATA_RXN2

 

GND

GND RSATA_RXN4 RSATA_RXP4 GND RSATA_TXN4 RSATA_TXP4 GND

8 054@+;5;)<)KWVVMK\WZ[

• You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives.

•When using hot-plug and NCQ, set the SATA Mode item in the BIOS to [AHCI Mode]. See section 2.5.4 SATA Configuration for details.

7.Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis.

+5V

SPDIFOUT GND

8 054@+;5

SPDIF_OUT

8 054@+;5,QOQ\ITI]LQWKWVVMK\WZ

The S/PDIF module is purchased separately.

1-20

ASUS P8H61-M LX2 Series