1.4.2Memory configurations
You may install 512MB, 1GB, 2GB, and 4GB unbuffered non‑ECC DDR3 DIMMs into the DIMM sockets.
• You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the
•According to Intel CPU specification, DIMM voltage below 1.65V is recommended to protect the CPU.
•Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor.
•Due to the memory address limitation on
-Use a maximum of 3GB system memory if you are using a
-Install a
•This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less.
•The maximum 16GB memory capacity can be supported with 8GB or above DIMMs. ASUS will update the memory QVL once the DIMMs are available in the market.
• The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the
•For system stability, use a more efficient memory cooling system to support a full memory load (2 DIMMs) or overclocking condition.
P8H61-M PLUS V3 Motherboard Qualified Vendors Lists (QVL)
DDR3-2666 (O.C.) MHz capability
Vendors | Part No. | Size | SS/DS | Chip Brand | Chip NO. | Timing | Voltage | DIMM socket support | |
(optional) | 2 DIMMs | ||||||||
|
|
|
|
|
|
|
| 1 DIMM | |
KINGSTON | KHX2250C9D3T1K2/4GX(XMP) | 4GB(2 x 2GB) | DS | - | - | - | 1.65V | • | • |
DDR3 1600 MHz and higher memory frequency is supported by Intel® 3rd generation processors.
DDR3-2600 (O.C.) MHz capability
Vendors | Part No. | Size | SS/DS | Chip Brand | Chip NO. | Timing | Voltage | DIMM socket support | |
(optional) | 2 DIMMs | ||||||||
|
|
|
|
|
|
|
| 1 DIMM | |
KINGSTON | KHX2250C9D3T1K2/4GX(XMP) | 4GB(2 x 2GB) | DS | - | - | - | 1.65V | • | • |
ASUS |