Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
CPU_FAN
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
GND
CHA_FAN
P8H61/USB3 R2.0
Rotation +12V GND
P8H61/USB3 R2.0 fan connectorsDo not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors!
• The CPU_FAN connector supports a CPU fan of maximum 1A (12 W) fan power.
• Only the
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis.
P8H61/USB3 R2.0
+5V | SPDIFOUT GND |
SPDIF_OUT
The S/PDIF module is purchased separately.
Chapter 1: Product introduction |