6.USB 2.0 connectors (10-1 pin USB56, USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
|
| USB56 |
| USB78 | ||
P8H61/USB3 R2.0 |
| USB+5V USB P6- USB P6+ | GND NC |
| USB+5V USB P8- USB P8+ | GND NC |
| PIN 1 | USB+5V USB P5- USB P5+ | GND | PIN 1 | USB+5V USB P7- USB P7+ | GND |
|
|
| ||||
USB910
|
| USB+5V USB_P10- USB_P10+ | GND NC | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PIN 1 | USB+5V USB P9- USB P9+ | GND | |||||
|
| ||||||
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
The USB module cable is purchased separately.
Chapter 1: Product introduction |