1.7.2Memory configurations
You may install 1GB, 2GB, 4GB and 8GB unbuffered non‑ECC DDR3 DIMMs into the DIMM sockets.
• You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the
•Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor.
•Due to the memory address limitation on
-Use a maximum of 3GB system memory if you are using a
-Install a
•This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less.
• The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the
•For system stability, use a more efficient memory cooling system to support a full memory load (2 DIMMs) or overclocking condition.
P8H61-M LX3 R2.0 Series Motherboard Qualified Vendors Lists (QVL)
DDR3-2400 (O.C.) MHz capability
|
|
|
| Chip |
|
|
| DIMM socket | |
Vendors | Part No. | Size | SS/DS | Chip NO. | Timing | Voltage | support (optional) | ||
Brand | 1DIMM | 2DIMMs | |||||||
|
|
|
|
|
|
|
| ||
CORSAIR | CMGTX8(XMP) | 8GB(2GB x 4) | SS | - | - | 1.65V | • | • | |
G.SKILL | 16GB(4GB x 4) | DS | - | - | 1.65V | • | • | ||
G.SKILL | 4GB(2 x 2GB) | DS | - | - | 1.65V | • | • | ||
GEIL | GET34GB2400C9DC(XMP) | 2GB | DS | - | - | 1.65V | • | • | |
KINGMAX | 2GB | SS | - | - | 1.8V | • | • | ||
Transcend | 4GB(2 x 2GB) | SS | - | - | - | 1.65V | • | • | |
Transcend | 4GB(2 x 2GB) | SS | - | - | 9 | 1.65V | • | • | |
Transcend | 4GB(2 x 2GB) | DS | - | - | 9 | 1.65V | • | • | |
PATRIOT | PVV34G2400C9K(XMP) | 4GB(2 x 2GB) | DS | - | - | 1.65V | • | • |
DDR3 1600 MHz and higher memory frequency is supported by Intel® 3rd generation processors.
ASUS |