SATA Mode Selection [IDE]
Allows you to set the SATA configuration.
[Disabled] | Disables the SATA function. |
[IDE] | Set to [IDE] when you want to use the Serial ATA hard disk drives as |
| Parallel ATA physical storage devices. |
[AHCI] | Set to [AHCI] when you want the SATA hard disk drives to use the AHCI |
| (Advanced Host Controller Interface). The AHCI allows the onboard storage |
| driver to enable advanced Serial ATA features that increases storage |
| performance on random workloads by allowing the drive to internally |
| optimize the order of commands. |
|
|
| • Due to H61 Chipset limitation, AHCI Mode only works on Windows® Vista / Windows® 7. |
| Please use IDE Mode on Windows® XP. |
| • [IDE] is the default SATA type. Under Windows® XP, there is no need to change the |
| SATA type. |
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T.
Hot Plug [Disabled]
This item only appears when you set the SATA Mode Selection item to [AHCI] and allows you to enable or disable the
2.5.4System Agent Configuration
Memory Remap Feature [Enabled]
[Enabled] | Allow you to enable remapping the memory above 4GB. |
[Disabled] | Disables this function. |
Graphics Configuration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [Auto] [iGPU] [PCIE]
iGPU Memory [Auto]
Allows you to set the iGPU memory size. Configuration options: [Auto] [32M] [64M] [96M] [128M] ~ [448M] [480M] [512M] [1024M]
Render Standby [Enabled]
Allows you to enable or disable Render Standby by internal graphics devices. Configuration options: [Disabled] [Enabled]
iGPU
Allows you to enable or disable the Lucid Virtu support for both the integrated and discrete graphics. The iGPU shared memory size will be fixed at 64MB. Configuration options: [Disabled] [Enabled]
Chapter 2: BIOS information |