3 Chapter

Ai Overclock Tuner [Auto]

Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Select any of these preset overclocking configuration options:

[Auto]

Loads the optimal settings for the system.

[Manual]

Allows you to individually set overclocking parameters.

[X.M.P.]

If you install memory modules supporting the eXtreme Memory Profile

 

(X.M.P.) Technology, choose this item to set the profiles supported by your

 

memory modules for optimizing the system performance.

BCLK/PCIE Frequency [XXX]

Allows you to adjust the CPU and VGA frequency to enhance the system performance. Use the <+> and <-> keys to adjust the value. You can also key in the desired value using the numeric keypad. The values range from 80.0MHz to 300.0MHz.

eXtreme Memory Profile [High Performance]

This item appears only when you set the Ai Overclock Tuner item to [X.M.P.] and allows you to select the X.M.P. mode supported by your memory module.

Configuration options: [Disabled] [Profile #1] [Profile #2]

Turbo Ratio [By All Cores]

Allows you to manually adjust the Trubo CPU ratio.

[Auto]

All Turbo ratio are set by Intel CPU default settings.

[By ALL Cores (Can Adjust in OS)]

All numbers of active cores will be set to one single

 

Turbo ratio in OS.

[By Per Core (Cannot Adjust in OS)]

All numbers of active cores can be set to an individual

 

Turbo ratio in BIOS.

By ALL Cores (Can Adjust in OS) [XX]

This item appears only when you set the Turbo Ratio item to [By ALL Cores (Can Adjust in OS)]. Use the <+> and <-> keys to adjust the value.

1-/2-/3-/4-Core Ratio Limit [XX]

This item appears only when you set the Turbo Ratio item to [By Per Core (Cannot Adjust in OS)]. Use the <+> and <-> keys to adjust the value.

Internal PLL Overvoltage [Auto]

Allows you to set the Internal PLL Overvoltage.

Configuration options: [Auto] [Enabled] [Disabled]

Memory Frequency [Auto]

Allows you to set the memory operating frequency. The configuration options vary with the BCLK/PCIE Frequency item settings.

Selecting a very high memory frequency may cause the system to become unstable! If this happens, revert to the default setting.

3-8

Chapter 3: BIOS setup