![](/images/backgrounds/166219/166219-208111x1.png)
Allows you to set the SATA configuration.
[Disabled] | Disables the SATA function. |
[IDE] | Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as |
| Parallel ATA physical storage devices. |
[AHCI] | Set to [AHCI Mode] when you want the SATA hard disk drives to use the |
| AHCI (Advanced Host Controller Interface). The AHCI allows the onboard |
| storage driver to enable advanced Serial ATA features that increases |
| storage performance on random workloads by allowing the drive to |
| internally optimize the order of commands. |
[RAID] | Set to [RAID Mode] when you want to create a RAID configuration from the |
| SATA hard disk drives. |
S.M.A.R.T.
These items appear only when you set the SATA Mode Selection item to [AHCI] or [RAID], and allow you to enable/disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
3.5.4System Agent Configuration
| UEFI BIOS Utility - Advanced Mode |
|
| Exit | |
Main | Ai Tweaker | Advanced | Monitor | Boot | Tool |
Back | Advanced\ System Agent Configuration > |
|
|
| |
System Agent Bridge Name |
| IvyBridge | Enable or disable memory remap above | ||
|
|
| Enabled | 4G. |
|
Memory Remap Feature |
|
|
|
>Graphics Configuration
>NB PCIe Configuration
Memory Remap Feature [Enabled]Allows you to enable remapping the memory above 4GB.
[Enabled] | Enables the function. |
[Disabled] | Disables this function. |
Chapter 3
ASUS |