3 Chapter
Allows you to set the
[Auto] | Select to apply the CPU default Turbo Ratio setting. |
[Manual] | Select to to manually assign a |
| is higher than or equal to the |
| must not be set to [Auto]. |
Allows you to set the
[Auto] | Select to apply the CPU default Turbo Ratio setting. |
[Manual] | Select to to manually assign a |
| higher than or equal to the |
| Ratio Limit must not be set to [Auto]. |
Allows you to set the 4 Core Ratio Limit
[Auto] | Select to apply the CPU default Turbo Ratio setting |
[Manual] | Select to to manually assign a |
| is higher than or equal to the |
|
Allows you to set the internal PLL voltage. Configuration options: [Auto] [Enabled] [Disabled]
CPU bus speed : DRAM speed ratio mode [Auto]Allows you to set the CPU bus speed to DRAM speed ratio mode.
[Auto] | DRAM speed is set to the optimized settings. |
[100:133] | The CPU bus speed to DRAM speed ratio is set to 100:133. |
[100:100} | The CPU bus speed to DRAM speed ratio is set to 100:100. |
Allows you to set the memory operating frequency. The configuration options vary with the BCLK/PCIE Frequency item settings.
iGPU Max Frequency [Auto][Auto] | The iGPU frequency is set to its optimized settings. |
[Manual] | Use the <+> or |
| frequency may vary depending on the system load. |
Allows you to enable or disable the EPU power saving function.
Configuration options: [Disabled] [Enabled]
EPU Setting [Auto]This item appears only when you set the EPU Power Saving MODE item to [Enabled] and allows you to select the EPU power saving mode.
Configuration options: [Auto] [Light Power Saving Mode] [Medium Power Saving Mode] [Max Power Saving Mode]
Chapter 3: BIOS setup |