1.Select the User Password item and press <Enter>.
2.From the Enter Current Password box, key in the current password, then press <Enter>.
3.From the Create New Password box, key in a new password, then press <Enter>.
4.Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press <Enter> when prompted to create/confirm the password. After you clear the password, the User Password item on top of the screen shows Not Installed.
3.4Ai Tweaker menuThe Ai Tweaker menu items allow you to configure
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction.
The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard.
3 Chapter
Scroll down to display other BIOS items.
UEFI BIOS Utility - Advanced Mode
Main | Ai Tweaker | Advanced | Monitor |
Target CPU Speed : 3200MHz |
|
| |
Target DRAM Speed : 1333MHz |
|
| |
|
|
| Auto |
Ai Overclock Tuner |
|
| |
Turbo Ratio |
|
| Auto |
Internal PLL Overvoltage |
|
| Auto |
CPU Bus speed : DRAM speed ratio mode |
| Auto | |
Memory Frequency |
|
| Auto |
EPU Power Saving Mode |
|
| Auto |
>OC Tuner
>DRAM Timing Control
>CPU Power Management
>DIGI+ Power Control
CPU Voltage | 0.916V | Offset Mode |
Exit
BootTool
[X.M.P.] When XMP is enabled BLCK frequency, CPU ratio and memory parameters will be auto optimized.
→←: Select Screen
↑↓: Select Item
Enter: Select
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
Chapter 3: BIOS setup |