SATA6G_5 (Blue)

Hot Plug [Disabled]

This item appears only when you set the previous item to [AHCI Mode] and [RAID mode]. It allows users to enable/disable SATA Hot Plug Support.

Configuration options: [Disabled] [Enabled].

SATA6G_6 (Blue)

Hot Plug [Disabled]

This item appear only when you set the previous item to [AHCI Mode]. It’s allow user to enabled/disabled SATA Hot Plug Support. Configuration options: [Disabled] [Enabled].

The following two items appear only when you set the SATA Mode item to [IDE Mode].

Serial-ATA Controller 0 [Enhanced]

Allows you to enabled/disabled the Serial-ATA Controller 0.

Configuration options: [Disabled] [Enhance] [Compatible]

Serial-ATA Controller 1 [Enhanced]

Allows you to enabled/disabled the Serial-ATA Controller 1.

Configuration options: [Disabled] [Enhance]

S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When read/write of your hard disk errors occur, this feature allows the hard disk to report warning messages during the POST.

Configuration options: [Disabled] [Enabled]

3.5.5USB Configuration

The items in this menu allow you to change the USB-related features.

3-30

Chapter 3: BIOS setup