PS/2 Keyboard and Mouse Support [Auto]

Select any of these settings when PS/2 keyboard and mouse are installed. These settings

only apply when Fast Boot is enabled.

[Auto]

For a faster POST time, PS/2 devices will only be available

 

when the system boots up or rebooted when the PS/2 devices

 

have not been reconnected or changed. If you disconnect or

 

change PS/2 devices before restarting the system, PS/2 devices

 

will not be available and BIOS setup program will not be

[Full Initialization]

accessible via PS/2 devices.

For full system control, PS/2 devices will be available during

[Disabled]

POST at any circumstances. This process will extend POST time.

For the fastest POST time, all PS/2 devices will not be available

 

until your computer enters the operating system.

Network Stack Driver Support [Disabled]

[Disabled]

Select to skip the network stack driver from loading during POST.

[Enabled]

Select to load the network stack driver during POST.

Next Boot after AC Power Loss [Normal Boot]

[Normal Boot]

Returns to normal boot on the next boot after AC power loss.

[Fast Boot]

Accelerates the boot speed on the next boot after AC power loss.

Full Screen Logo [Enabled]

[Enabled]

Enables the full screen logo display feature.

[Disabled]

Disables the full screen logo display feature.

Set this item to [Enabled] to use ASUS MyLogo 2™ feature.

POST Delay Time [3 sec]

This item appears only when you set Full Screen Logo to [Enabled]. This item allows you to select the desired additional POST waiting time to easily enter the BIOS setup. You can only execute the POST delay time during Normal Boot. The values range from 1 to 10 seconds.

This feature will only work under normal boot.

Bootup NumLock State [On]

[On]

Sets the power-on state of the NumLock to [On].

[Off]

Sets the power-on state of the NumLock to [Off].

Wait For ‘F1’ If Error [Enabled]

[Disabled]

Disables this function.

[Enabled]

The system waits for the <F1> key to be pressed when error

 

occurs.

Option ROM Messages [Force BIOS]

[Force BIOS]

The third-party ROM messages will be forced to display during the boot

 

sequence.

[Keep Current]

The third-party ROM messages will be displayed only if the third-party

 

manufacturer had set the add-on device to do so.

ASUS P9X79-E WS

3-39