The navigation keys at the bottom of the screen allow you to move through the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen.
The utility supports maximum four hard disk drives for RAID configuration.
Creating a RAID set
To create a RAID set:
1.From the utility main menu, select 1. Create RAID Volume and press <Enter>. The following screen appears:
Intel(R) Rapid Storage Technology - Option ROM - v10.0.0.1032
Copyright(C)
[ CREATE VOLUME MENU ]
Name: Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0 GB
Sync: N/A
Create Volume
[ HELP ]
Enter a unique volume name that has no special characters and is
16 characters or less.
[↑↓]Change |
2.Enter a name for the RAID set and press <Enter>.
3.When the RAID Level item is selected, press the up/down arrow key to select a RAID level to create, and then press <Enter>.
4.When the Disks item is selected, press <Enter> to select the hard disk drives you want to include in the RAID set. The SELECT DISKS screen appears:
|
| [ SELECT DISKS ] |
| |
Port | Drive Model | Serial # | Size | Status |
|
|
|
|
|
0 | ST3160812AS | 9LS0HJA4 | 149.0GB | |
1 | ST3160812AS | 9LS0F4HL | 149.0GB | |
2 | ST3160812AS | 3LS0JYL8 | 149.0GB | |
3 | ST3160812AS | 9LS0BJ5H | 149.0GB | |
Select 2 to 6 disks to use in creating the volume.
ASUS |