Asus PB278Q manual Connecting the cables, To connect the VGA/HDMI/DVI/DisplayPort cable

2.3Connecting the cables

Connect the cables as the following instructions:

•To connect the power cord: Connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet.

•To connect the VGA/HDMI/DVI/DisplayPort cable:

a.Plug one end of the VGA/HDMI/DVI/DisplayPort cable to the monitor’s VGA/

HDMI/DVI/DisplayPort jack.

b.Connect the other end of the VGA/HDMI/DVI/DisplayPort cable to your computer’s VGA/HDMI/DVI/DisplayPort jack.

c.Tighten the two screws to secure the VGA/DVI connector.

•To connect the audio cable: Plug one end of the audio cable to the monitor’s Audio Line-in Port. Connect the other end of the audio cable to your computer’s audio Port.

•To use the earphone: Connect the end with plug type to the monitor’s earphone jack when an HDMI or DisplayPort signal is fed.

When these cables are connected, you can choose the desired signal from the Input Select item in the OSD menu.

2-3 Chapter 2: Setup