Asus PP-DLW ASUS PP-DLWmotherboard user guide, 7.Front panel audio connector (10-1pin J5), 6.ATX power connectors (24/20-pinEATXPWR, 8-pinCON12V)

6.ATX power connectors (24/20-pin EATXPWR, 8-pin CON12V)

These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

In addition to the 24/20-pin EATXPWR connector, this motherboard requires that you connect the 8-pin +12V power plug to the CON12V connector to provide sufficient power to the CPU.

Make sure that your ATX 12V power supply can provide 20A on the +12V lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 300W for a fully configured system. The system may become unstable and may experience difficulty powering up if the power supply is inadequate.

		24-pin Power Connector
			1	+3 Volts
	+3		Volts		GND	12V
	+3		Volts	-12 Volts	GND	12V
		Ground		Ground	GND	12V
		+5 Volts		PSON#	GND	12V
		Ground		Ground
	+5		Volts	Ground
		Ground		Ground
		Power OK		-5 Volts
		+5V Standby		+5 Volts
	+12		Volts	+5 Volts
	+12		Volts	+5 Volts	For Power Supply
		+3 Volts		Ground	with 20-pin
PP-DLW
					Power Connector

PP-DLW ATX Power Connector

8-pin

7.Front panel audio connector (10-1 pin J5)

This is an interface for the Intel front panel audio cable that allow convenient connection and control of audio devices.

J5

BOUT_L LOUT_L

NC

BOUT_R LOUT_R

+5VA MICPWR

AGND_A MIC2

1

PP-DLW

PP-DLW Intel Panel Connector

ASUS PP-DLW motherboard user guide 2-21