Asus PP-DLW UART2 Use As, 10.USB header (10-1pin J25), ASUS PP-DLWmotherboard user guide, 11.Infrared module connector (5-pinJ26)

10.USB header (10-1 pin J25)

If the USB ports on the rear panel are inadequate, a USB header is available for additional USB ports. The USB header complies with USB 2.0 specification that supports up to 480Mbps connection speed. This speed advantage over the conventional 12Mbps on USB 1.1 allows faster Internet connection, interactive gaming, and simultaneous running of high-speed peripherals.

You may purchase a USB module to connect to the USB header.

PP-DLW

PP-DLW USB 2.0 Header

J25

NC

GND

LDP1

LDM1

USB+5V

1 5

6 10

GND

LDP2

LDM2

USB+5V

11.Infrared module connector (5-pin J26)

This connector supports an optional wireless transmitting and receiving infrared module. This module mounts to a small opening on system chassis that support this feature. You must also configure the UART2 Use As parameter in BIOS to set UART2 for use with IR.

Use the five pins as shown in Back View and connect a ribbon cable from the module to the motherboard SIR connector according to the pin definitions.

Front View Back View

J26

IRTX GND IRRX +5V

IRTX+5V

1

GND(NC)

IRRX

PP-DLW

PP-DLW Infrared Module Connector

ASUS PP-DLW motherboard user guide 2-23