OnBoard Floppy Controller [Enabled]

Allows you to enable or disable the floppy disk controller. Configuration options: [Disabled] [ Enabled]

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address. Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]

Serial Port2 Address [2F8/IRQ3]

Allows you to select the Serial Port2 base address. Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Serial Port2 Mode [Normal]

Allows you to select the mode for Serial Port2. When the item Serial Port 2 Address is set to Disabled, this item does not appear. Configuration options: [Normal] [Sharp-IR] [SIR] [Consumer]

IR Duplex Mode

Allows selection of either Full Duplex or Half Duplex for Serial Port2 in IR mode. This item appears only when Serial Port2 Mode is set to either Sharp-IR, SIR, or Consumer.

IR Receiver Pin

Allows selection of either Receiver pin or Transmit pin for Serial Port2 in IR mode. This item appears only when Serial Port2 Mode is set to either Sharp-IR, SIR, or Consumer.

Parallel Port Address [378]

Allows you to select the Parallel Port base addresses. Configuration options: [Disabled] [378] [278] [3BC]

Parallel Port Mode [Normal]

Allows you to select the Parallel Port mode. When the item Parallel Port Address is set to 278, the Parallel Port Mode options are only Normal and EPP. Configuration options: [Normal] [Bi-directional] [EPP] [ECP]

EPP Version [1.9]

Allows selection of the Parallel Port EPP version. This item appears only when the Parallel Port Mode is set to EPP. Configuration options: [1.9] [1.7]

ASUS PP-DLW motherboard user guide

4-11