D.Installing the Adaptec driver with existing NetWare 5.X/6.0

1.Make a backup copy of the old driver (if it exists) before installing the new driver.

2.At the NetWare console prompt type:

LOAD NWCONFIG

3.Select "Driver Options (load/unload disk and network drivers)" and press ENTER.

4.In the Driver Options menu select "Configure disk and storage device drivers" and press ENTER.

5.Select "Select an additional driver" and press ENTER.

6.Press Insert to add an unlisted driver.

7.Insert the Adaptec Ultra320 FMS Driver disk for NetWare into the floppy drive.

8.Press F3 and specify the path to the ADPU320.HAM driver. For NetWare 5.1 and 6.0, select:

A:\NETWARE\V51_V60\

For NetWare 5.0, select:

A:\NETWARE\V42_V50\

9.Select ADPU320.HAM and press ENTER.

10. When prompted, click Yes to copy the driver.

11.Specify the path where the driver ADPU320.HAM should be installed, or press ENTER to accept the default.

12.When prompted, click Yes to save the existing driver and its information file.

13.Choose "Select/Modify driver parameters" and press ENTER.

14.Press Alt-Esc to switch to System Console, and at the prompt, type:

LOAD A:\NETWARE\V51_V60\ADPU320.HAM (for NetWare 5.1/6.0)

or

LOAD A:\NETWARE\V42_V50\ADPU320.HAM (for NetWare 5.0)

ASUS PU-DLS/PU-DL motherboard user guide

5-33