Asus PU-DL, PU-DLS 129

5.Follow the succeeding installation instructions.

6.When done, the following screen appears. Click Finish to complete the installation.

ASUS PU-DLS/PU-DL motherboard user guide

5-37

Contents

Page E1302 First Edition April Chapter 1: Product introduction Chapter 2: Hardware information Chapter 3: Powering up Chapter 4: BIOS setup 5: Driver installation Page Federal Communications Commission Statement Canadian Department of Communications Statement This class B digital apparatus complies with Canadian ICES-003 Electrical safety Operation safety How this guide is organized Conventions used in this guide Where to find more information ASUSTeK COMPUTER INC. (Asia-Pacific) ASUS COMPUTER INTERNATIONAL (America) ASUS COMPUTER GmbH (Germany and Austria) Page Page Product introduction Page Thank you for buying the ASUS® PU-DLS/PU-DLmotherboard ASUS PU-DLS/PU-DLmotherboard user guide 1.3.1 Product highlights Latest processor technology DDR memory support Advanced 64-bit PCI-Xbus Onboard LAN Zero-ChannelRAID (ZCR) feature ATA/100 IDE support 1.3.2 Value-addedsolutions Temperature, fan, and voltage monitoring Dual function power switch Wake-Upsupport ACPI ready Smart BIOS Compliance 1.4.1 Major components Page 1.4.2 Core specifications Firmware hub IDE connectors Standby power LED ASUS ASIC CPU power fail LED PCI-X/PCI slots PS/2 mouse port Parallel port port (for Hardware information Page 2.1.1 Placement direction 2.1.2 Screw holes Chapter 2: Hardware information Page 2.4.1 Overview 2.4.2 Installing the CPU 2.4.3 Installing the CPU heatsink and fan Page 2.5.1 Overview 2.5.2 Memory Configurations Memory configuration table DIMM placement 2.5.3 Installing a DIMM 2.5.4 Removing a DIMM 2.6.1 Installing an expansion card 2.6.2 Configuring an expansion card Standard Interrupt Assignments IRQ assignments for this motherboard 2.6.3 PCI slots PCI-Xslots (PCI X1 to X4) PCI1/PCI2 slots 1.CPU external frequency selection (J16) 2.SCSI setting (J13) 3.PCI-XGigabit LAN setting (J15) 4.32-bitGigabit LAN setting (J1) 5.Keyboard wake-upsetting (J14) 6.Onboard VGA setting (J2) 7.Clear RTC RAM (J3) 1.Floppy disk drive connector (34-1pin FLOPPY1) 2.Serial port 2 connector (10-1pin COM2) 3.IDE connectors (40-1pin IDE1, IDE2) 4.SSI/ATX power connectors (24/20-pinU21, 8/4-pinU58) SCSI Connection Notes 6.CPU, Chassis, and Power Fan Connectors (3-pinCPU_FAN1, CPU_FAN2, CHASSIS_FAN1, CHASSIS_FAN2) 7.Wake-On-RingConnector (2-pinWOR1) 8.Server management card connector (50-pinCON1) 9.IPMI connector (4-pinCON2) 10.SMBus connector (6-1pin J5) 11.Zero Channel RAID slot (PCIX1) 12.Chassis alarm lead (4-1pin J6) 13.System panel connector (20-pinPANEL) •System Power LED Lead (3-1pin PLED) •System Message LED Lead (2-pinMLED) System Warning Speaker Lead •ATX Power Switch / Soft-OffSwitch Lead (2-pinPWR) •Reset Switch Lead (2-pinRESET) Powering up Page Award BIOS Beep Codes Chapter 3: Powering up BIOS setup Managing and updating your BIOS 4.1.1 Creating a bootable disk Chapter 4: BIOS Setup 4.1.2 Updating the BIOS Page Delete 4.2.1 BIOS menu bar 4.2.2 Legend bar General help Saving changes and exiting the Setup program Scroll bar Sub-menu System Time [XX:XX:XX] System Date [XX/XX/XXXX] Legacy Diskette A [1.44M, 3.5 in.] Floppy 3 Mode Support [Disabled] Supervisor Password [Disabled] / User Password [Disabled] Halt On [All Errors] Installed Memory [XXX MB] 4.3.1 Primary and Secondary Master/Slave Type [Auto] [User Type HDD] Translation Method [LBA] Cylinders Head Sector CHS Capacity SMART Monitoring [Disabled] PIO Mode [4] Ultra DMA Mode [Disabled] 4.3.2 Keyboard Features Boot Up NumLock Status [On] Keyboard Auto-RepeatRate [12/Sec] Keyboard Auto-RepeatDelay [1/4 Sec] CPU Speed [Manual] CPU Frequency Multiplier [8x] CPU Level 1 Cache, CPU Level 2 Cache [Enabled] Hyper-ThreadingTechnology [Enabled] BIOS Update [Enabled] PS/2 Mouse Function Control [Auto] OS/2 Onboard Memory > 64M [Disabled] USB Legacy Support [Auto] 4.4.1 Chip Configuration SDRAM Configuration [By SPD] SDRAM CAS Latency [2.5T] SDRAM RAS to CAS Delay [3T] SDRAM RAS Precharge Delay [3T] SDRAM Active Precharge Delay [6T] Video Memory Cache Mode [UC] Memory Hole At 15M-16M[Disabled] Delayed Transaction [Enabled] 4.4.2 I/O Device Configuration Floppy Disk Access Control [R/W] Onboard Serial Port 1 [3F8H/IRQ4] Onboard Serial Port 2 [2F8H/IRQ3] Onboard Parallel Port [378H/IRQ7] 4.4.3 PCI Configuration Slot 1, Slot 2, Slot 3/4/5/6/7/8 IRQ [Auto] PCI/VGA Palette Snoop [Disabled] PCI Latency Timer [32] Onboard SCSI BIOS [Auto] Primary VGA BIOS First [PCI VGA Card] USB 1.1 Controllers [3 Controllers] 4.4.3.1 PCI IRQ Resource Exclusion IRQ XX Reserved [No/ICU] Power Management [User Defined] Video Off Option [Suspend ->Off ] Video Off Method [DPMS OFF] HDD Power Down [Disabled] Suspend Mode [Disabled] PWR Button < 4 Secs [Soft Off] 4.5.1 Power Up Control AC PWR Loss Restart [Disabled] Wake/Power Up On Ext. Modem [Disabled] Power Up On PCI Device [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Mouse [Disabled] Automatic Power Up [Disabled] 4.5.2 Hardware Monitor MB Temperature [xxxC/xxxF] CPU0 Temperature [xxxC/xxxF] CPU1 Temperature [xxxC/xxxF] CPU0 Fan Speed [xxxxRPM] 1st Boot : (BAID) [<0> Floppy] 2nd Boot : (BCV) [None] 3rd Boot : (BEV) [None] 4th Boot : (Legacy) [Disabled] Plug & Play O/S [No] Reset Configuration Data [No] MPS 1.4 Support [Enabled] Boot Virus Detection [Enabled] Quick Power On Self Test [Enabled] Boot Up Floppy Seek [Enabled] Remote Console [Disabled] Exit & Save Changes Exit & Discard Changes Load Setup Defaults Discard Changes Save Changes Driver installation Microsoft Windows 2000 Server Microsoft Windows XP Professional 5.1.1 Drivers 5.1.2 Management Sofware 5.1.3 Utilities 5.1.4 Contact 5.2.1 Adaptec® SCSI driver installation winnt40 folder txtsetup.oem \drivers\adaptec\7902 B.Installing Windows NT 4.0 with an Ultra320 SCSI Controller C.Installing the Adaptec Ultra320 driver with existing Windows NT \winnt40 D. Changing Boot Controllers in Windows NT 5.2.2Intel® 82544GC/82540EM LAN driver installation Page B. New System Installation Page C. Existing System Installation Network Adapter Add 5.2.3 ATI® Rage XL display driver installation 5.3.1 Adaptec® SCSI driver installation B.Installing Windows 2000 with an Ultra320 SCSI Controller C.Installing the Adaptec Ultra320 driver with existing Windows \win2000 D.Updating the Adaptec Ultra320 driver under Windows a:\win2000 E. Changing Boot Controllers in Windows 5.3.2Intel® 82544GC/82540EM LAN driver installation Page B. Update Driver on an Existing System Installation Intel PRO/1000 LAN Driver Install Base Driver Only 3.Highlight the Intel(R) 82554GC-basedNetwork Connection, click the Properties PRO-1000 Server Adapter C. Updating the LAN driver using the LAN driver disk 5.3.3 ATI® Rage XL Display Driver Installation 5.3.4 Enabling ATA100 Feature in Windows® 5.4.1 Adaptec® SCSI driver installation B.Installing Windows XP (32-bit)with an Ultra320 SCSI Controller C.Installing Windows XP (64-bit)with an Ultra320 SCSI Controller D. Updating the Adaptec Ultra320 driver under Windows XP 5.4.2Intel® 82544GC/82540EM LAN Driver Installation Page Page Page Page 5.4.3 ATI® Rage XL Display Driver Installation 5.5.1 Adaptec® SCSI Driver Installation C. Installing NetWare 4.2 with an Ultra320 SCSI Controller NOTE LOAD ADPU320.HAM SLOT=<XX D.Installing the Adaptec driver with existing NetWare 5.X/6.0 E.Installing the Adaptec driver with existing NetWare F. Removing the Driver From a NetWare Server 5.5.2Intel® 82544GC/82540EM LAN driver installation Page 5.5.3ATI® Rage XL Display Driver Installation 5.6.1Intel® 82544GC/82540EM LAN Driver Installation 5.6.2 ATI® Rage XL Display Driver Installation 5.7.1 Adaptec® SCSI Driver Installation 5.7.2Intel® 82544GC/82540EM LAN Driver Installation 5.7.3 ATI® Rage XL Display Driver Installation