3.Connect one end of the supplied 7-pin SATA cable to the SATA connector at the back of the drive, then connect the other end to a SATA connector on the motherboard. See page

4-7 for the location of the SATA connectors.

4.Connect the 15-pin SATA power plug from the power supply unit to the power connector at the back of the drive.

5.Place the HDD on the tray. Make sure that the HDD screws are aligned with the screw holes and rails.

6.When the HDD screws align with the screw rails, push the drive carefully until it is completely flushed on the bay.

The HDD screw lock clicks to indicate that the drive is properly in place.

HDD screw lock

ASUS Pundit P3-PH5

2-19