5.4.4Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu.

Advanced Chipset Settings

WARNING: Setting wrong values in below sections may cause the system to malfunction.

NorthBridge Configuration

NorthBridge Configuration

North Bridge chipset Configuration

Memory Remap Feature

[Disabled]

Configure

DRAM Timing by SPD

[Enabled]

Initiate

Graphic Adapter

[PEG/PCI]

Internal

Graphic Mode Select

[Enabled, 8MB]

Fixed

Graphic Memory Size

[128MB]

DVMT Graphic Memory Size

[128MB]

PEG Port

Configuration

 

PEG Force x1

[Disabled]

Configure North Bridge feature.

ENABLED: Allow remapping of overlapped PCI memory above the total physical memory.

DISABLED: Do not allow remapping of memory

Memory Remap Feature [Disabled]

Allows you to enable or disable the remapping of the overlapped PCI memory above the total physical memory. Enable this option only when you install 64- bit operating system. Configuration options: [Disabled] [Enabled]

Configure DRAM Timing by SPD [Enabled]

When this item is enabled, the DRAM timing parameters are set according to the DRAM SPD (Serial Presence Detect). When disabled, you can manually set the DRAM timing parameters through the DRAM sub-items.

Configuration options: [Enabled] [Disabled]

Initiate Graphic Adapter [PEG/PCI]

Allows you to select the graphics controller as the primary boot device. Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]

Internal Graphic Mode Select [Enabled, 8MB]

Allows you to select the amount of system memory used by the Internal graphics device.

Configuration options: [Disabled] [Enabled,1MB] [Enabled, 8MB]

ASUS Pundit P3-PH5

5-23