Wan, Internet Connection | Asus RT-AC68R guide

4.3 WAN

4.3.1 Internet Connection

The Internet Connection screen allows you to configure the settings of various WAN connection types.

To configure the WAN connection settings:

1.From the navigation panel, go to Advanced Settings > WAN > Internet Connection tab.

2.Configure the following settings below. When done, click Apply.

•WAN Connection Type: Choose your Internet Service Provider type. The choices are Automatic IP, PPPoE, PPTP, L2TP or fixed IP. Consult your ISP if the router is unable to obtain a valid IP address or if you are unsure the WAN connection type.

•Enable WAN: Select Yes to allow the router Internet access. Select No to disable Internet access.

64

Image 64

Asus RT-AC68R manual Wan, Internet Connection, To configure the WAN connection settings

Contents

RT-AC68R Copyright 2013 ASUSTeK Computer Inc. All Rights Reserved Table of contents Configuring the Advanced Settings Utilities 112 Package contents Welcome Your wireless router LAN 1~4 LED Specifications Positioning your router Setup Requirements Wired connection Router SetupTo set up your wireless router via wired connection Wireless connection To set up your wireless router via wireless connectionPage Logging into the Web GUI To log into the web GUI To use QIS with auto-detection Quick Internet Setup QIS with Auto- detectionLog into the Web GUI. The QIS page launches automatically For Automatic IP Dhcp For PPPoE, PPTP, and L2TP For Static IP Auto-detection of your ISP connection type takes place whenPage Connecting to your wireless network To connect to your network Configuring the General settings Using the Network Map Setting up the wireless security settings To set up the wireless security settings Key in your security passkey Click Apply when done Managing your network clientsTo manage your network clients From the navigation panel, go to General Network Map tab Monitoring your USB device To monitor your USB device Safely removing the USB disk To safely remove the USB disk Click Enable Creating a Guest NetworkTo create a guest network From the navigation panel, go to General Guest Network To configure additional options, click Modify Click Yes on the Enable Guest Network screenSelect an Authentication Method Select Disable or Enable on the Access Intranet item Managing QoS Quality of Service Bandwidth Using the Traffic ManagerTo set up bandwidth priority Enter all IP addresses as *.*.*.* or leave the field blank Page Monitoring Traffic Click OK Click Apply to save the settings Setting up Parental ControlTo use the parental control function Using AiDisk Using the USB ApplicationTo use AiDisk Page Using Servers Center Using Media Server To launch the Media Server setting page, go to General USB Application Servers Center Media Servers tab. Refer toFollowing for the descriptions of the fields To use Samba share Follow the steps below to add, delete, or modify an account To create a new accountClick to add new account To delete an existing account Using the FTP Share service To use FTP Share service To configure Miscellaneous settings Configure the following settingsMaximum Login User Device Name Work Group 3 3G/4GCharacter set on FTP Server To set up 3G/4G internet access Click Apply Using AiCloud To use AiCloud Insert a USB storage device into the wireless router Cloud DiskTo create a cloud disk Turn on Cloud DiskPage Smart Access To use Smart Sync Smart SyncClick Add new account Wireless GeneralPage Radius with To enable WPS on your wireless network 2 WPSPage Bridge Page Wireless MAC Filter To set up the Wireless MAC filter Radius Setting To set up wireless Radius settings Professional Page LAN LAN IP To modify the LAN IP settings To configure the Dhcp serverEnable the Dhcp Server field, tick Yes Dhcp ServerPage To configure the LAN Routing table On the Enable static routes field, choose YesRoute On the Static Route List, enter the network information Iptv WAN To configure the WAN connection settingsInternet Connection Page Page To set up Port Trigger Port TriggerPage To set up Port Forwarding Virtual Server/Port ForwardingPage Local IP Key in the client’s LAN IP address Differences between port trigger and port forwarding 4 DMZ To set up DMZTo remove DMZ To set up Ddns Ddns Ddns service will not work under these conditions NAT Passthrough To set up IPv6 From the navigation panel, go to Advanced Settings IPv6Enter your IPv6 LAN and DNS settings Click Apply IPv6 To set up access to a VPN server VPN Server Firewall To set up basic Firewall settingsURL Filter To set up a keyword filter To set up a URL filterKeyword filter Network Services Filter Enter a word or phrase and click the Add button Click Apply To set up a Network Service filter Administration Operation ModeTo set up the operating mode Select any of these operation modes System To set up the System settingsTime Zone Select the time zone for your network Firmware Upgrade Restore/Save/Upload SettingTo upgrade the firmware To restore/save/upload wireless router settings System Log contains your recorded network activities System LogTo view your system log To launch the Device Discovery utility Device DiscoveryFrom your computer’s desktop, click Unplug the wireless router from the power source Firmware Restoration Asus EZ Printer Sharing Setting up your printer serverSpecify a firmware file, then clickUpload To set up the EZ Printer sharing mode RT-AC68R Page To share your LPR printer Using LPR to Share PrinterSelect Add a local printer and then click Next Page Select Custom then click Settings Click Next to finish setting up the standard TCP/IP port Page Download Master To use Download Master Use the navigation panel to configure the advanced settings Configuring Bit Torrent download settingsTo configure BitTorrent download settings NZB settings Troubleshooting Basic Troubleshooting Restart your network in the following sequence 101 Frequently Asked Questions FAQs Cannot access the router GUI using a web browser Dhcp server has been disabled Move the router closer to the wireless clientOut of Range 104 Internet is not accessible You forgot the Ssid network name or network password How to restore the system to its default settings? Firmware upgrade failed Click Tools Internet options Connections tab LAN settings Cannot access Web GUIClick OK when done Settings Cllick Apply Now when doneWindows Click Start Control Panel Network and Internet Internet Protocol Version 6 TCP/IPv6, then click Properties Click the Apple icon located on the top left of your screen Disable the dial-up connection, if enabled Windows Tick Never dial a connection Asus Recycling/Takeback Services Federal Communications Commission Statement Against harmful interference in a residential installation Prohibition of Co-location Declaration of Conformity for R&TTE directive 1999/5/EC Safety InformationCE Mark Warning Canada, Industry Canada IC Notices Radio Frequency RF Exposure InformationCanada, avis d’Industry Canada IC Cet appareil numérique de classe B est conforme aux normes GNU General Public License NCC 警語Version 2, June Preamble Terms & conditions for copying, distribution, & modification 119 Page Page Page 123 No Warranty Authorised distributors in Turkey For Turkey onlyTel. No Address ASUSTeK Computer INC. Asia Pacific Asus Contact informationAsus Computer International America Networks Global Hotline Information Country Hotline Number 128 Authorised Asus Computer GmbH Representative Manufacturer ASUSTeK Computer Inc Tel +886-2-2894-3447Europe