Setting up your printer server | Asus RT-AC68R specification

3.Set a static IP on your computer and use the following to set up your TCP/IP settings:

IP address: 192.168.1.x

Subnet mask: 255.255.255.0

4.From your computer’s desktop, click

Start > All Programs > ASUS Utility RT-AC68R Wireless Router > Firmware Restoration.

5.Specify a firmware file, then clickUpload.

NOTE: This is not a firmware upgrade utility and cannot be used on a working ASUS Wireless Router. Normal firmware upgrades must be done through the web interface. Refer to Chapter 4: Configuring the Advanced Settings for more details.

5.3 Setting up your printer server

5.3.1 ASUS EZ Printer Sharing

ASUS EZ Printing Sharing utility allows you to connect a USB printer to your wireless router’s USB port and set up the print server. This allows your network clients to print and scan files wirelessly.

87

Image 87

Asus RT-AC68R manual Setting up your printer server, Asus EZ Printer Sharing, Specify a firmware file, then clickUpload

Contents

RT-AC68R Copyright 2013 ASUSTeK Computer Inc. All Rights Reserved Table of contents Configuring the Advanced Settings 112 Utilities Welcome Package contents LAN 1~4 LED Your wireless router Specifications Positioning your router Setup Requirements Router Setup Wired connectionTo set up your wireless router via wired connection To set up your wireless router via wireless connection Wireless connectionPage To log into the web GUI Logging into the Web GUI Quick Internet Setup QIS with Auto- detection To use QIS with auto-detectionLog into the Web GUI. The QIS page launches automatically For Automatic IP Dhcp For PPPoE, PPTP, and L2TP Auto-detection of your ISP connection type takes place when For Static IPPage To connect to your network Connecting to your wireless network Using the Network Map Configuring the General settings To set up the wireless security settings Setting up the wireless security settings From the navigation panel, go to General Network Map tab Key in your security passkey Click Apply when doneManaging your network clients To manage your network clients Monitoring your USB device To monitor your USB device To safely remove the USB disk Safely removing the USB disk From the navigation panel, go to General Guest Network Click EnableCreating a Guest Network To create a guest network Select Disable or Enable on the Access Intranet item To configure additional options, click ModifyClick Yes on the Enable Guest Network screen Select an Authentication Method Using the Traffic Manager Managing QoS Quality of Service BandwidthTo set up bandwidth priority Enter all IP addresses as *.*.*.* or leave the field blank Page Monitoring Traffic Setting up Parental Control Click OK Click Apply to save the settingsTo use the parental control function Using the USB Application Using AiDiskTo use AiDisk Page Using Media Server Using Servers Center To use Samba share To launch the Media Server setting page, go to General USBApplication Servers Center Media Servers tab. Refer to Following for the descriptions of the fields To delete an existing account Follow the steps below to add, delete, or modify an accountTo create a new account Click to add new account Using the FTP Share service To use FTP Share service Device Name To configure Miscellaneous settingsConfigure the following settings Maximum Login User 3 3G/4G Work GroupCharacter set on FTP Server Click Apply To set up 3G/4G internet access To use AiCloud Using AiCloud Turn on Cloud Disk Insert a USB storage device into the wireless routerCloud Disk To create a cloud diskPage Smart Access Smart Sync To use Smart SyncClick Add new account General WirelessPage Radius with 2 WPS To enable WPS on your wireless networkPage Bridge Page To set up the Wireless MAC filter Wireless MAC Filter To set up wireless Radius settings Radius Setting Professional Page LAN IP LAN Dhcp Server To modify the LAN IP settingsTo configure the Dhcp server Enable the Dhcp Server field, tick YesPage On the Static Route List, enter the network information To configure the LAN Routing tableOn the Enable static routes field, choose Yes Route Iptv To configure the WAN connection settings WANInternet Connection Page Page Port Trigger To set up Port TriggerPage Virtual Server/Port Forwarding To set up Port ForwardingPage Differences between port trigger and port forwarding Local IP Key in the client’s LAN IP address To set up DMZ 4 DMZTo remove DMZ Ddns To set up Ddns NAT Passthrough Ddns service will not work under these conditions IPv6 To set up IPv6From the navigation panel, go to Advanced Settings IPv6 Enter your IPv6 LAN and DNS settings Click Apply VPN Server To set up access to a VPN server To set up basic Firewall settings FirewallURL Filter To set up a URL filter To set up a keyword filterKeyword filter Enter a word or phrase and click the Add button Click Apply Network Services Filter To set up a Network Service filter Select any of these operation modes AdministrationOperation Mode To set up the operating mode To set up the System settings SystemTime Zone Select the time zone for your network To restore/save/upload wireless router settings Firmware UpgradeRestore/Save/Upload Setting To upgrade the firmware System Log System Log contains your recorded network activitiesTo view your system log Device Discovery To launch the Device Discovery utilityFrom your computer’s desktop, click Firmware Restoration Unplug the wireless router from the power source Setting up your printer server Asus EZ Printer SharingSpecify a firmware file, then clickUpload To set up the EZ Printer sharing mode RT-AC68R Page Using LPR to Share Printer To share your LPR printerSelect Add a local printer and then click Next Page Select Custom then click Settings Click Next to finish setting up the standard TCP/IP port Page To use Download Master Download Master Configuring Bit Torrent download settings Use the navigation panel to configure the advanced settingsTo configure BitTorrent download settings NZB settings Basic Troubleshooting Troubleshooting Restart your network in the following sequence 101 Cannot access the router GUI using a web browser Frequently Asked Questions FAQs Move the router closer to the wireless client Dhcp server has been disabledOut of Range 104 Internet is not accessible How to restore the system to its default settings? You forgot the Ssid network name or network password Firmware upgrade failed Cannot access Web GUI Click Tools Internet options Connections tab LAN settingsClick OK when done Internet Protocol Version 6 TCP/IPv6, then click Properties SettingsCllick Apply Now when done Windows Click Start Control Panel Network and Internet Click the Apple icon located on the top left of your screen Tick Never dial a connection Disable the dial-up connection, if enabled Windows Federal Communications Commission Statement Asus Recycling/Takeback Services Prohibition of Co-location Against harmful interference in a residential installation Safety Information Declaration of Conformity for R&TTE directive 1999/5/ECCE Mark Warning Cet appareil numérique de classe B est conforme aux normes Canada, Industry Canada IC NoticesRadio Frequency RF Exposure Information Canada, avis d’Industry Canada IC NCC 警語 GNU General Public LicenseVersion 2, June Preamble Terms & conditions for copying, distribution, & modification 119 Page Page Page 123 No Warranty For Turkey only Authorised distributors in TurkeyTel. No Address Asus Contact information ASUSTeK Computer INC. Asia PacificAsus Computer International America Country Hotline Number Networks Global Hotline Information 128 Manufacturer ASUSTeK Computer Inc Tel +886-2-2894-3447 Authorised Asus Computer GmbH RepresentativeEurope