Monitoring your USB device | Asus RT-AC68R specs

3.1.3 Monitoring your USB device

The ASUS Wireless Router provides two USB ports for connecting USB devices or USB printer to allow you to share files and printer with clients in your network.

NOTES:

•To use this feature, you need to plug a USB storage device, such as a USB hard disk or USB flash drive, to the USB 3.0/2.0 ports on the rear panel of your wireless router. Ensure that the USB storage device is formatted and partitioned properly. Refer to the Plug-n-Share Disk Support List at http://event.asus.com/networks/disksupport

•The USB ports support two USB drives or one printer and one USB drive at the same time.

23

Image 23

Asus RT-AC68R manual Monitoring your USB device

Contents

RT-AC68R Copyright 2013 ASUSTeK Computer Inc. All Rights Reserved Table of contents Configuring the Advanced Settings 112 Utilities Welcome Package contents LAN 1~4 LED Your wireless router Specifications Positioning your router Setup Requirements To set up your wireless router via wired connection Router SetupWired connection To set up your wireless router via wireless connection Wireless connectionPage To log into the web GUI Logging into the Web GUI Log into the Web GUI. The QIS page launches automatically Quick Internet Setup QIS with Auto- detectionTo use QIS with auto-detection For Automatic IP Dhcp For PPPoE, PPTP, and L2TP Auto-detection of your ISP connection type takes place when For Static IPPage To connect to your network Connecting to your wireless network Using the Network Map Configuring the General settings To set up the wireless security settings Setting up the wireless security settings From the navigation panel, go to General Network Map tab Key in your security passkey Click Apply when doneManaging your network clients To manage your network clients Monitoring your USB device To monitor your USB device To safely remove the USB disk Safely removing the USB disk From the navigation panel, go to General Guest Network Click EnableCreating a Guest Network To create a guest network Select Disable or Enable on the Access Intranet item To configure additional options, click ModifyClick Yes on the Enable Guest Network screen Select an Authentication Method To set up bandwidth priority Using the Traffic ManagerManaging QoS Quality of Service Bandwidth Enter all IP addresses as *.*.*.* or leave the field blank Page Monitoring Traffic To use the parental control function Setting up Parental ControlClick OK Click Apply to save the settings To use AiDisk Using the USB ApplicationUsing AiDisk Page Using Media Server Using Servers Center To use Samba share To launch the Media Server setting page, go to General USBApplication Servers Center Media Servers tab. Refer to Following for the descriptions of the fields To delete an existing account Follow the steps below to add, delete, or modify an accountTo create a new account Click to add new account Using the FTP Share service To use FTP Share service Device Name To configure Miscellaneous settingsConfigure the following settings Maximum Login User Character set on FTP Server 3 3G/4GWork Group Click Apply To set up 3G/4G internet access To use AiCloud Using AiCloud Turn on Cloud Disk Insert a USB storage device into the wireless routerCloud Disk To create a cloud diskPage Smart Access Click Add new account Smart SyncTo use Smart Sync General WirelessPage Radius with 2 WPS To enable WPS on your wireless networkPage Bridge Page To set up the Wireless MAC filter Wireless MAC Filter To set up wireless Radius settings Radius Setting Professional Page LAN IP LAN Dhcp Server To modify the LAN IP settingsTo configure the Dhcp server Enable the Dhcp Server field, tick YesPage On the Static Route List, enter the network information To configure the LAN Routing tableOn the Enable static routes field, choose Yes Route Iptv Internet Connection To configure the WAN connection settingsWAN Page Page Port Trigger To set up Port TriggerPage Virtual Server/Port Forwarding To set up Port ForwardingPage Differences between port trigger and port forwarding Local IP Key in the client’s LAN IP address To remove DMZ To set up DMZ4 DMZ Ddns To set up Ddns NAT Passthrough Ddns service will not work under these conditions IPv6 To set up IPv6From the navigation panel, go to Advanced Settings IPv6 Enter your IPv6 LAN and DNS settings Click Apply VPN Server To set up access to a VPN server URL Filter To set up basic Firewall settingsFirewall Keyword filter To set up a URL filterTo set up a keyword filter Enter a word or phrase and click the Add button Click Apply Network Services Filter To set up a Network Service filter Select any of these operation modes AdministrationOperation Mode To set up the operating mode Time Zone Select the time zone for your network To set up the System settingsSystem To restore/save/upload wireless router settings Firmware UpgradeRestore/Save/Upload Setting To upgrade the firmware To view your system log System LogSystem Log contains your recorded network activities From your computer’s desktop, click Device DiscoveryTo launch the Device Discovery utility Firmware Restoration Unplug the wireless router from the power source Specify a firmware file, then clickUpload Setting up your printer serverAsus EZ Printer Sharing To set up the EZ Printer sharing mode RT-AC68R Page Select Add a local printer and then click Next Using LPR to Share PrinterTo share your LPR printer Page Select Custom then click Settings Click Next to finish setting up the standard TCP/IP port Page To use Download Master Download Master To configure BitTorrent download settings Configuring Bit Torrent download settingsUse the navigation panel to configure the advanced settings NZB settings Basic Troubleshooting Troubleshooting Restart your network in the following sequence 101 Cannot access the router GUI using a web browser Frequently Asked Questions FAQs Out of Range Move the router closer to the wireless clientDhcp server has been disabled 104 Internet is not accessible How to restore the system to its default settings? You forgot the Ssid network name or network password Firmware upgrade failed Click OK when done Cannot access Web GUIClick Tools Internet options Connections tab LAN settings Internet Protocol Version 6 TCP/IPv6, then click Properties SettingsCllick Apply Now when done Windows Click Start Control Panel Network and Internet Click the Apple icon located on the top left of your screen Tick Never dial a connection Disable the dial-up connection, if enabled Windows Federal Communications Commission Statement Asus Recycling/Takeback Services Prohibition of Co-location Against harmful interference in a residential installation CE Mark Warning Safety InformationDeclaration of Conformity for R&TTE directive 1999/5/EC Cet appareil numérique de classe B est conforme aux normes Canada, Industry Canada IC NoticesRadio Frequency RF Exposure Information Canada, avis d’Industry Canada IC Version 2, June NCC 警語GNU General Public License Preamble Terms & conditions for copying, distribution, & modification 119 Page Page Page 123 No Warranty Tel. No Address For Turkey onlyAuthorised distributors in Turkey Asus Computer International America Asus Contact informationASUSTeK Computer INC. Asia Pacific Country Hotline Number Networks Global Hotline Information 128 Europe Manufacturer ASUSTeK Computer Inc Tel +886-2-2894-3447Authorised Asus Computer GmbH Representative