ENGLISH
Before setting up the system
1 | Check that all the components are correct, then press the POWER operation switch on the main unit or |
the POWER button on the remote control unit to turn on the power. |
(Main unit) | (Remote control unit) |
2
3
NOTE:
Press the SYSTEM button to enter the setting.
*SYSTEM SET UP
NOTE: Please make sure the “AUDIO” position of the slide switch on the remote control unit.
Press the SELECT or 
(down) button to switch to the speaker configuration set up.
Press the SYSTEM button again to finish system set up. System set up can be finished at any time. The changes to the settings made up to that point are entered.
Setting the speaker configuration
1 | Use the | (left) and (right) buttons to select your front speaker type. | |||
|
|
| (Initial) |
| |
|
| 1 FRONT | LARGE | LARGE | SMALL |
|
|
|
| ||
|
|
|
| (left) button | (right) button |
Press the SELECT or 
(down) button to switch to the center speaker setting.
2 | Use the | (left) and | (right) buttons to select your center speaker type. |
|
| (Initial) |
2 CENTER SMALL
LARGE 
SMALL 
NONE
(left) button | (right) button |
Press the SELECT or 
(down) button to switch to the surround speaker setting.
NOTE:
•When “Small” has been selected for the front speakers, “Large” cannot be selected for the center speaker.
3 | Use the | (left) and | (right) buttons to select your surround speaker type. |
|
| (Initial) |
3 SURR. SMALL
LARGE 
SMALL 
NONE
(left) button | (right) button |
Press the SELECT or 
(down) button to switch to the subwoofer setting.
18
