2.4Removing the cover

To remove the cover:

1.On the rear panel, locate the thumbscrew that secures the cover to the chassis.

2.Turn the thumbscrew counterclockwise unti it gets loose.

The thumbscrew cannot be removed from the chassis.

3.Firmy grip the top handle and

push the cover about 1 cm forward.

4.Lift the cover to expose the internal components of your system.

The cover does not completely disengage from the chassis.

When fully open, the cover remains tilted at an angle of about 35º. Do not push down further to prevent damage to the system.

2 - 4

Chapter 2: Basic installation