USB 2.0 Controller [Enabled]

Allows you to enable or disable the USB 2.0 controller.

Configuration options: [Enabled] [Disabled]

USB 2.0 Controller Mode [FullSpeed]

Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12 Mbps). Configuration options: [Full Speed ] [Hi Speed]

USB Mass Storage Device Configuration

USB Mass Storage Device Configuration

Number of seconds

 

 

 

USB Mass Storage Reset Delay

[20

Sec]

POST waits for the USB

mass storage device

No USB Mass Storage device detected

 

after start unit

 

command.

Device #1

N/A

 

 

Emulation Type

[N/A]

 

Device #2

N/A

 

 

Emulation Type

[N/A]

 

Device #3

N/A

 

 

Emulation Type

[N/A]

 

Device #4

N/A

 

 

Emulation Type

[N/A]

 

Device #5

N/A

 

 

Emulation Type

[N/A]

 

Device #6

N/A

 

 

Emulation Type

[N/A]

 

USB Mass Storage Reset Delay [20 Sec]

Allows you to select the number of seconds POST waits for the USB mass storage device after the start unit command. The message “No USB mass storage device detected” appears if none is installed in the system. Configuration options: [10 Sec ] [20 Sec] [30 Sec] [40 Sec]

Emulation Type [N/A]

When set to Auto, USB devices less than 530 MB will be emulated as a floppy drive, and the remaining drives as hard drives. Forced FDD option can be used to force an HDD formatted drive to boot as FDD (for example, ZIP drive).

The Device and Emulation Type items appear only when USB storage devices are installed.

4.4.6Load MiniLoader [Disabled]

Enable this item if you want the system to always enter Instant ON. Configuration options: [Enabled] [Disabled]

ASUS S-presso barebone system

4 - 25