4 Chapter

Deleting a RAID set

Take caution when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set.

To delete a RAID set:

1.From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The following screen appears:

Intel(R) Rapid Storage Technology - Option ROM - v10.0.0.1032

Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.

 

 

[ DELETE VOLUME MENU ]

 

 

Name

Level

Drives

Capacity

Status

Bootable

Volume0

RAID0(Stripe)

2

298.0GB

Normal

Yes

[ HELP ]

Deleting a volume will reset the disks to non-RAID.

WARNING: ALL DISK DATA WILL BE DELETED. (This does not apply to Recovery volumes)

[↑↓]-Select

[ESC]-Previous Menu

[DEL]-Delete Volume

2.Use the up/down arrow key to select the RAID set you want to delete, and then press <Del>. The following warning message appears:

[ DELETE VOLUME VERIFICATION ]

ALL DATA IN THE VOLUME WILL BE LOST!

(This does not apply to Recovery volumes)

Are you sure you want to delete volume “Volume0”? (Y/N):

3.Press <Y> to delete the RAID set and return to the utility main menu, or press <N> to return to the DELETE VOLUME menu.

Exiting the Intel® Rapid Storage Technology Option ROM utilityTo exit the utility:

1.From the utility main menu, select 5. Exit, and then press <Enter>. The following warning message appears:

[ CONFIRM EXIT ]

Are you sure you want to exit? (Y/N):

2.Press <Y> to exit or press <N> to return to the utility main menu.

4-32

Chapter 4: Software support