Asus SABERTOOTH Z77, SABERTOOTHZ77, Z77 3.5.7APM, ErP Ready [Disabled], Power On By RTC [Disabled], Power On By PCIE/PCI [Disabled], Restore AC Power Loss [Power Off]

3 Chapter

3.5.7APM

UEFI BIOS Utility - Advanced Mode					Exit
Main	Ai Tweaker	Advanced	Monitor	Boot	Tool
Back	Advanced\ APM >
			Disabled	Allow BIOS yo switch off some power
ErP Ready
				at S5 to get the system ready for ErP
Restore AC Power Loss			Power Off	requirement. When set to Enabled, all
				other PME options will be switched
Power On By PCIE/PCI			Disabled	off.
Power On By RTC			Disabled

ErP Ready [Disabled]

This item allows user to switch off some power at S5 to get the system ready for ErP requirement. When set to Enabled, all other PME options will be switched off. Configuration options: [Disabled] [Enabled]

Restore AC Power Loss [Power Off]

[Power On]	The system goes into on state after an AC power loss.
[Power Off]	The system goes into off state after an AC power loss.
[Last State]	The system goes into either off or on state, whatever the system state was
	before the AC power loss.

Power On By PCIE/PCI [Disabled]

[Disabled]	Disables the PCIE devices to generate a wake event.
[Enabled]	Enables the PCIE devices to generate a wake event.

Power On By RTC [Disabled]

[Disabled]	Disables RTC to generate a wake event.
[Enabled]	When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
	Minute/Second becomes user-configurable with set values.

3-30 Chapter 3: BIOS setup