2.Tick On in the Status field to enable the function, and click Save.

Click to enable or disable battery saving mode. This function only applies to notebooks.

Select and click to enable or disable the function

4 Chapter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Click to enable or disable the timer. When enabled, move

Click to save the

Click to cancel the

the scroll bar to the desired time. When the system is

settings made.

settings made.

idle for more than the time period you set, the system

 

 

 

 

 

automatically goes into the Intel® Rapid Start mode.

 

 

 

 

 

Default time is 10 minutes.

 

 

 

 

 

Recovering the partition

This procedure allows you to delete the Intel® Rapid Start Technology from your system and recover the partition you made for the Intel Rapid Start Technology installation.

1.Run the Command Prompt tool.2.Type diskpart and press Enter.

3.At the diskpart prompt, type list disk after DISKPART, and press Enter.

4.Select the disk (SSD) where the Intel® Rapid Start Technology is installed for volume recovery, type select disk x (x = number), and press Enter.

The value “x” refers to a disk number where you want to delete the store partition.

4-40

Chapter 4: Software support