ASUS Striker Extreme 5-37
2. Select RAID 1 then press
<Enter> to display the
following.
MAIN MENU
Auto conguration
Manual conguration
c. The selection bar moves to the
Physical Drive menu Using the up
or down arrowkeys, select a drive
then press <Enter> to set the rst
drive of the RAID set.
d. Repeat step c to set the
second, third, and fourth drive. The
number of available drives depend
on the installed and enabled
physical drives in the system.
TIP: For server systems, we recommend using a lower array block size. For
multimedia computer systems used mainly for audio and video editing, we
recommend a higher array block size for optimum performance.
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
2 XXXXXXXXXXX XXXXXXMB
3 XXXXXXXXXXX XXXXXXMB
Creating a RAID 1 set (Mirrored)
To create a RAID 1 set:
1. From the Silicon Image
conguration utility main
menu, select Create RAID
set then press <Enter>.
The following sub-menu
appears.
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conicts
Low Level Format
Logical Drive Info
RAID0
RAID1
RAID10
SPARE DRIVE
RAID0
RAID1
SPARE DRIVE
CONCATENATION
e. The utility prompts a message to input the RAID size, use the up or
down arrow keys to set the RAID size then press <Enter>.
f. Press <Y> to conrm or <N> to return to the Main Menu.