2.9Installing a Serial ATA disk drive
The system supports one Serial ATA hard disk drive.
To install a Serial ATA hard disk drive:
1.Connect the SATA power cable to the plug of the power supply unit.
1 
2.Connect the SATA signal cable and the power plugs to the connectors at the back of the drive.
3.Locate the HDD tray.
4.Insert a hard disk drive (with the HDD PCB facing the top of the chassis) to the tray, then secure it with four screws.
2
4
4
4
4
4
5.Connect the SATA signal cable to the
SATA connector on the motherboard, and tighten all the cables with the plastic coils.
ASUS |