5.4.2Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the
Advanced Chipset Setting
WARNING: Setting wrong values in below sections may cause system to malfunction.
NorthBridge Configuration
Southbridge Configuration
Memory Options & Information
North Bridge Configuration
| North Bridge chipset Configuration | ENABLE: Allow | |
|
|
| remapping of |
| Memory Remap Feature | [Enabled] | |
| overlapped PCI memory | ||
| Configure DRAM Timing by SPD | [Enabled] | |
| above the total | ||
| Initiate Graphic Adapter | [PEG/PCI] | physical memory. |
|
| ||
| Internal Graphics Mode Select | [Enabled, 8MB] | DISABLE: Do not allow |
| PEG Port Configuration |
| remapping of memory |
|
|
| |
| PEG Force x1 | [Disabled] |
|
| Video Function Configuration |
|
|
|
|
|
|
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory above the total physical memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configurating DRAM Timing by SPD. Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device. Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
Allows you to select the amout of system memory used by the Interanal graphics device. Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
PEG Port Configuration
PEG Force x1 [Disabled]
Allows you to enable or disable the PEG Forec x 1.
Configuration options: [Enabled] [Disabled]
ASUS |