2.

Enter a name for the recovery set and press <Enter>.

3.

When the RAID Level item is selected, press the up/down arrow keys to

 

select Recovery, and then press <Enter>.

 

 

 

4.

When the Disks item is selected, press <Enter> to select the hard disk drives

 

you want to include in the recovery set. The SELECT DISKS screen appears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[ SELECT DISKS ]

 

 

 

 

 

 

Port Drive Model

Serial #

Size

Status

 

 

 

 

0

ST3160812AS

9LS0HJA4

149.0GB

Non-RAID Disk

 

 

 

 

 

1

ST3160812AS

9LS0F4HL

149.0GB

Non-RAID Disk

 

 

 

 

2

ST3160812AS

3LS0JYL8

149.0GB

Non-RAID Disk

 

 

 

3

ST3160812AS

9LS0BJ5H

149.0GB

Non-RAID Disk

 

 

 

 

 

Select 1 Master and 1 Recovery disk to create volume.

 

 

 

 

 

[↑↓]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done

 

 

 

 

 

 

 

 

5.

Use the up/down arrow keys to select a drive, press <TAB> to select a Master

 

disk, and then press <SPACE> to select a Recovery disk. A small triangle

 

marks the selected drive. Press <Enter> after completing your selection.

6.

When the Sync item is selected, use the up/down arrow keys to select a sync

 

option that you want and press <Enter>.

 

 

 

7.

When the Create Volume item is selected, press <Enter>. The following

 

warning message appears.

 

 

 

 

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

8.Press <Y> to create the recovery set and return to the main menu, or <N> to go back to the CREATE VOLUME menu.

If a recovery set is created, you cannot add more RAID sets even when you have more non-RAID disks installed in your system.

ASUS TS100-E7/PI4

5-27