4.5.11APM
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Advanced
Restrore AC Power Loss | [Power Off] |
EuP Ready | [Disabled] |
Power On By PCI | [Disabled] |
Power On By PCIE | [Disabled] |
Power On By Ring | [Disabled] |
Power On By RTC | [Disabled] |
Specify what state to go to when power is
Restore AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system will reboot after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
EuP Ready [Disabled]
When set to [Enabled], all other PME options will be switched off. Configuration options: [Disabled] [Enabled]
This item is available on selected models.
Power On By PCI [Disabled]
[Disabled] | Disables the PME to wake up from S5 by PCI devices. |
[Enabled] | Allows you to turn on the system through a PCI LAN or modem |
| card. This feature requires an ATX power supply that provides at |
| least 1A on the +5VSB lead. |
Power On By PCIE [Disabled]
[Disabled] | Disables the PCIE devices to generate a wake event. |
[Enabled] | Enables the PCIE devices to generate a wake event. |
Power On By Ring [Disabled]
[Disabled] | Disables Ring to generate a wake event. |
[Enabled] | Enables Ring to generate a wake event. |
Power On By RTC [Disabled]
[Disabled] | Disables RTC to generate a wake event. |
[Enabled] | When set to [Enabled], the items RTC Alarm Date (Days) and |
| Hour/Minute/Second will become |
| values. |
Chapter 4: BIOS setup |